Wire Harness Board Frames

The Bostontec Harness/Panel Frame is the result of three years of cooperative development with several major wire harness fabricators. The electric drive provides 26" of vertical adjustability with the board positioned in either the horizontal or vertical position.

Part No. Harness Frame
PHF3672 4" Bar Harness Frame, 36" x 72", Electric Lift, Manual Tilt 220 lbs.
PHFT3672 4" Bar Harness Frame, 36" x 72", Electric Lift, Electric Tilt 230 lbs.
PHFD3672 4" Bar Harness Frame, 36" x 72", HD, Dual Electric Lift, Dual Electric Tilt 260 lbs.
PHF3672...4" Bar Harness Frame, 36" x 72", Electric Lift, Manual Tilt

Features and Specifications:

• Deck 36" x 72", expands to 48" x 72" with a 36" space saving footprint
• Electrically height-adjustable through 26"
• Manual tilt 0° to 90° in 10-degree increments
• 350 lb. capacity
• Supports boards up to 48" x 96"
• Multiple frames can work together with an optional controller to support extra long boards
• Self-contained linear actuator with integral limit switches, 120 VAC, 1.6A at full load
• Available on levelers, lag plates or 4" casters
• Finished with a gray powder coated epoxy
• Weight: 220 lbs.

{ Industrial Workstations | Laboratory Workstations | Technical/Office }
{ Private Label Furniture | About BOSTONtec | Contact BOSTONtec }
{ New Products | Site Map | Case Systems }

2700 James Savage Rd., Midland, MI 48642
Phone: (989) 496-9510 | Fax: (989) 496-9927