Storage

Single 6" Tool Drawer

DRW06

•  Mounts under TM, PF and MS worksurfaces 30" 
      and 36" deep (will not fit 24" deep worksurface)
•  Full 3/4" extension roller drawer slides
• 18 gauge (.047) cold rolled steel
• Key lock provided
• Mounting brackets included
• Finished with a gray epoxy powder coat
• Weights: Single stack =   17 lbs.

Double 6" Tool Drawer Stack

DRW26

•  Mounts under TM, PF and MS worksurfaces 30"  and 36" deep (will not fit 24" deep worksurface)
• Full 3/4" extension roller drawer slides
• 18 gauge (.047) cold rolled steel
• Key lock provided
• Mounting brackets included
• Finished with a gray epoxy powder coat
• Weights: Double stack = 36 lbs.
  

Triple 6" Tool Drawer Stack

DRW36

• Mounts under TM, PF and MS worksurfaces 30"  and 36" deep (will not fit 24" deep worksurface)
• Full 3/4" extension roller drawer slides
• 18 gauge (.047) cold rolled steel
• Key lock provided
• Mounting brackets included
• Finished with a gray epoxy powder coat
• Weights: Triple stack =   54 lbs.
  

Single 12" Storage/File Drawer

DRW12

• One 12"d x 12"w x 18" drawer
• Mounts under TM, PF and MS worksurfaces 30" and 36"deep (will not fit 24" deep worksurface)
•  Accepts suspension file hardware (not provided)
• Full 3/4" extension roller drawer slides
• 18 gauge (.047) cold rolled steel
• Key lock provided
• Mounting brackets included
• Finished with a gray epoxy powder coat
• Weight: 19 lbs.

Tool/File Drawer Stack

PO1114

• Mounts under TM, PF and MS worksurfaces 30"
  and 36" deep (will not fit 24" deep worksurface)
• Loading capacity: 40 lbs.
• 3/4 extension roller slides
• Surface extends 13.5"
• Shelf formed from 18 gauge cold rolled steel
• Finished with a gray epoxy powder coat
• Weight: 10 lbs.

DRW612

• One 6" deep drawer 12" wide x 18" long and one 12" deep drawer 12" wide x 18" long
• Mounts under TM, PF and MS worksurfaces 30" and 36" deep (will not fit 24" deep worksurface)
• Accepts suspension file hardware (not provided)
• Full 3/4" extension roller drawer slides
• 18 gauge (.047) cold rolled steel
• Key lock provided
• Mounting brackets included
• Finished with a gray epoxy powder coat
• Weight: 39 lbs.

Drawer Cubby

DC12

• Mounts under TM, PF and MS Worksurfaces 30" and 36" deep (will not fit 24" deep worksurface)
• Full-length drawer mounting plates with base plate
• 18 gauge (.047) cold rolled steel
• Mounting brackets and base plate; drawer not included
• Finished with a gray epoxy powder coat
• Weight: 8 lbs.

Overhead Storage Cabinet

SC1230

• Mounts on BOSTONtec uprights
• Flipped door
• Key lock provided
• 18 gauge (.047) cold rolled steel
• Finished with a gray epoxy powder coat
• Weight: 30 lbs.
  
  

{ Industrial Workstations | Laboratory Workstations | Technical/Office }
{ Private Label Furniture | About BOSTONtec | Contact BOSTONtec }
{ New Products | Site Map | Case Systems }

2700 James Savage Rd., Midland, MI 48642
Phone: (989) 496-9510 | Fax: (989) 496-9927