Manual Adjustable Base Frames

Manual height adjustable frames are best suited for single shift, single operator applications where frequent height changes are not required.

Standing Workstation Frame

This frame provides a cost effective means of supporting a small worksurface with all the standard BOSTONtec modules.

The worksurface is manually adjustable in one inch increments when installed with a work surface capacity of 150 lbs.

The standing workstation frame works best for single shift, single operator applications. This frame is also well suited to supporting shelving and standard BOSTONtec accessories over conveyors.

• SWF3069 Standing WS Frame, 30" 53 Lbs.
• SWF6069 Standing WS Frame, 60" 73 Lbs.
• SWFA24 Standing WS 19.5" Arm Set 5 Lbs.
• SWFCB Standing WS Frame Cross Bar 3 Lbs.

Cantilevered Style Base Frame

This frame has been designed with sufficient strength and stability to support a variety of tasks in a broad range of environments. Height adjustments are made by loosing the locking hand screw and ratcheting the telescoping leg to the desired height and tightening the hand lock. A rear fixing frame provides stable support for mounting uprights to support bin rails, shelving, articulating modules and lighting. A complete offering of shelving and storage cabinets are also available. Cantilevered style frames provide stable support while allowing the operator to easily move without interference from front table legs.

• Cantilevered-style leg
• Seated to standing operator adjustability,
  from the 5th to the 95th percentile,
  (27" to 39" without worksurface)
• Worksurface configurations available:
  24", 30", and 36" depths;
  36", 48", 60", 72", and 96" lengths
• Strong open deck frame easily accepts
  tilting worksurfaces, retractable ball transfers,
  recessed wells, etc.
• Designed to meet ANSI/HFS 100-1988
• Generous under table leg room helps with ADA compliance
• Frame accepts Bostontec casters
• Finished with a gray epoxy powder coat

AF2436  24" x  36" Worksurface    97 Lbs.
AF2448  24" x  48" Worksurface  107 Lbs.
AF2460  24" x  60" Worksurface  118 Lbs.
AF2472  24" x  72" Worksurface  125 Lbs.
AF3036  30" x  36" Worksurface    99 Lbs.
AF3048  30" x  48" Worksurface  104 Lbs.
AF3060  30" x  60" Worksurface  120 Lbs.
AF3072  30" x  72" Worksurface  131 Lbs.
AF3096  30" x  96" Worksurface  142 Lbs.
AF3648  36" x  48" Worksurface  111 Lbs.
AF3660  36" x  60" Worksurface  122 Lbs.
AF3672  36" x  72" Worksurface  131 Lbs.
AF3696  36" x  96" Worksurface  142 Lbs.

Note: Order worksurface separately  

Center Justified Style Base Frame

Features and Specifications:

• Center-justified style leg
• Seated to standing operator adjustability, from the 5th to the 95th percentile, (27" to 39" without worksurface)
• Worksurface configurations available: 30", 36" and 48" depths; 36", 48", 60", 72", and 96" lengths
• Strong open deck frame easily accepts retractable ball transfers, recessed wells, etc.
• Designed to meet ANSI/HFS 100-1988
• Generous under table leg room helps with ADA compliance
• Frame accepts Bostontec casters
• Finished with a gray epoxy powder coat

Part No. Manual CJ Base Frame Weight
AFC3036 30" x 36" Worksurface 94 lbs.
AFC3048 30" x 48" Worksurface 99 lbs.
AFC3060 30" x 60" Worksurface 115 lbs.
AFC3072 30" x 72" Worksurface 126 lbs.
AFC3648 36" x 48" Worksurface 106 lbs.
AFC3660 36" x 60" Worksurface 117 lbs.
AFC3672 36" x 72" Worksurface 126 lbs.
AFC3696 36" x 96" Worksurface 137 lbs.
AFC4872 48" x 72" Worksurface 116 lbs.
AFC4896 48" x 96" Worksurface 124 lbs.

Note: Order worksurface separately

{ Industrial Workstations | Laboratory Workstations | Technical/Office }
{ Private Label Furniture | About BOSTONtec | Contact BOSTONtec }
{ New Products | Site Map | Case Systems }

2700 James Savage Rd., Midland, MI 48642
Phone: (989) 496-9510 | Fax: (989) 496-9927