Electric Adjustable Base Frame Workstation

The BOSTONtec electric base frame is the table that pioneered the electric height adjustable revolution. This patented design set new standards for affordable adjust ability when it was introduced in 1993. A simple single linear actuator drive, using no chains, pulleys, springs, or hydraulics insures years of no maintenance and trouble free operation. Entering its third generation design, it remains the best value available in height adjustability today. Innovative design and state-of-the-art manufacturing processes allows BOSTONtec to offer affordable prices previously associated with manually adjustable crank tables.

Cantilevered Style Base Frame

Cantilevered style frames offer more open space under the table allowing operators to work with minimal interference from table legs. This base frame can accept uprights and the complete complement of BOSTONtec accessories.

Features and Specifications:

• Cantilevered-style leg insures ample leg room
• Seated to standing operator adjustability,
  from the 5th to the 95th percentile, (27" to 43" without worksurface)
• Self-contained linear actuator with integral limit switches, 24 VDC low voltage control, UL, CSA, 120 VAC, 1.6A
• 1/2" per second travel, hand-switch controlled
• Strong open deck frame easily accepts tilting, rotating, and retractable ball transfer worksurfaces
• Designed to meet ANSI/HFS 100-1988
• Effortless operation and generous under table leg room helps with ADA compliance
• Frame accepts Bostontec casters
• Finished with a gray epoxy powder coat

PB2436 24" x 36" Worksurface 113 Lbs.
PB2448 24" x 48" Worksurface 129 Lbs.
PB2460 24" x 60" Worksurface 144 Lbs.
PB2472 24" x 72" Worksurface 160 Lbs.

PB3036 30" x 36" Worksurface 115 Lbs.
PB3048 30" x 48" Worksurface 130 Lbs.
PB3060 30" x 60" Worksurface 146 Lbs.
PB3072 30" x 72" Worksurface 161 Lbs.
PB3096 30" x 96" Worksurface 180 Lbs.

PB3648 36" x 48" Worksurface 127 Lbs.
PB3660 36" x 60" Worksurface 142 Lbs.
PB3672 36" x 72" Worksurface 158 Lbs.
PB3696 36" x 96" Worksurface 174 Lbs.

Note: Order worksurface separately

Center Justified Style Base Frame

Center Justified frames
have been designed for tasks requiring larger worksurfaces.

Generally task items are larger or heavier, and require the operators to walk around the table to reach the task from all sides. This base frame will not accept uprights or any shelving above the worksurface.

Features and Specifications

• Center-justified leg, no rear fixing frame
• Seated to standing operator adjustability, from the 5th to the 95th percentile,
  (27" to 43" without worksurface)
• Frame shipped with standard 500 lb. lift drive – contact dealer or factory for 1000 lb. option
• Self-contained linear actuator with integral limit switches, 24 VDC low voltage control, UL, CSA, 120 VAC, 1.6A
• 1/2-inch per second travel, hand-switch controlled
• Strong open deck frame easily accepts rotating and retractable ball transfer worksurfaces
• Designed to meet ANSI/HFS 100 -1988
• Effortless operation and generous under table leg room helps with ADA compliance
• Frame accepts Bostontec casters
• Finished with a gray epoxy powder coat

Part No. Power CJ Base Frame Weight
PBC3036 30" x 36" Worksurface 110 Lbs.
PBC3048 30" x 48" Worksurface 125 Lbs.
PBC3060 30" x 60" Worksurface 141 Lbs.
PBC3072 30" x 72" Worksurface 156 Lbs.
PBC3648 36" x 48" Worksurface 122 Lbs.
PBC3660 36" x 60" Worksurface 137 Lbs.
PBC3672 36" x 72" Worksurface 153 Lbs.
PBC3696 36" x 96" Worksurface 169 Lbs.
PBC4872 48" x 72" Worksurface 148 Lbs.
PBC4896 48" x 96" Worksurface 156 Lbs.

Note: Order worksurface separately

Base Frame Accessories

Programmable Height, Tilt Control Optional on all new phase II BOSTONtec electric height adjustable and electric tilt frames. Allows operator to program three perselected positions for worksurface height or tilt. Easy to program and re-program. Safe 24vdc hand held control.

Drop Down Foot, Cantilevered Fits all cantilevered BTF AF and PB style frames. Restores starting worksurface height to 28" when 4"casters are added. Powder coated epoxy finish, utility gray. Casters are not included. Weight: (26") 7 lbs..(32") 8.5 lbs.

Drop Down Foot, Cantilevered Fits all cantilevered BTF AF and PB style frames. Restores starting worksurface height to 28" when 4"casters are added. Powder coated epoxy finish, utility gray. Casters are not included. Weight: (26") 7 lbs..(32") 8.5 lbs.

{ Industrial Workstations | Laboratory Workstations | Technical/Office }
{ Private Label Furniture | About BOSTONtec | Contact BOSTONtec }
{ New Products | Site Map | Case Systems }

2700 James Savage Rd., Midland, MI 48642
Phone: (989) 496-9510 | Fax: (989) 496-9927