Industrial Product Catalog
Articulating Accessories
Articulating Document Holder
DH1111
- Mounts on all standard BOSTONtec uprights
- Height adjustable on upright in one-inch increments
- Infinite tilt adjustment: 20°-90°
- 15 lb. recommended loading capacity
- Arm: 1.25" x 2.5" 14 gauge steel tubing
- Can be mounted on left or right side of uprights
- Finished with a gray epoxy powder coat
| Part No. | Description | Weight |
| DH1111 | 11" x 11" Document Holder on Double Articulating Arm | 7 lbs. |
| DH1420 | 14" x 20" Document Holder on Double Articulating Arm | 8 lbs. |
Articulating Bin Holder
BH1420
- Mounts on all standard BOSTONtec uprights
- Supports assorted size tote bins (15 -4"w x 5"d x 3"h)
- 3 bin support rails are permanently positioned
- Bin support plate swivels
- Loading capacity: 40 lbs.
- Can be mounted on right or left side of uprights
- 14 gauge (.074) cold rolled steel
- Double articulating arm: 1.25" x 2.5" 14 gauge steel tubing
- Finished with a gray epoxy powder coat
- Weight: 9 lbs.
Articulating Container Platform/VDT Holder
- 13" x 13" and 13" x 22"
- Mounts on all standard BOSTONtec uprights
- Height adjustable on uprights in one-inch increments
- Both platforms rotate 360°
- 40 lb. capacity when mounted on articulating arm
- Both platforms accept keyboard tray KT1907
- Tray: 18 gauge (.047) cold rolled steel shelf
- Arm: 1.25" x 2.5" 14 gauge (.074) steel tubing
- Finished with a gray epoxy powder coat
- Weight: PH1322 = 11 lbs.; PH1313 = 10 lbs.
| Part No. | Description | Weight |
| PH1313 | 13" x 13" Platform | 10 lbs. |
| PH1322 | 13" x 22" Platform | 11 lbs. |
Keyboard Articulating Arm
KBAA
- Mounts on all standard BOSTONtec slotted uprights
- Two 8-inch arms with mountings extend 18" from upright
- Height adjustable on uprights in one-inch increments
- Keyboard platform rotates 360°
- Platform accepts keyboard
- Mouse platform included
- Finished with a gray epoxy powder coat
Adjustable Flat Panel Display Arm
AFPDA
- Mounts on all standard BOSTONtec slotted uprights
- Two 8-inch arms with mountings extend 18" from upright
- Panel mounting allows 8" of vertical adjustment
- Height adjustable on uprights in one-inch increments
- Needs 9-15 lbs. of weight to work properly
- Finished with a gray epoxy powder coat
Flat Panel Dislay Arm
FPDA
- Mounts on all standard BOSTONtec slotted uprights
- Two 8-inch arms with mountings extend 18" from upright
- Height adjustable on uprights in one-inch increments
- Finished with a gray epoxy powder coat
Under Work Surface Keyboard Tray and Mouse
Keyboard Tray:
- 11" x 21" tray size with wrist support
- Spring assist mechanism
- 18-inch track to allow in/out movement with 360 degree swivel
- 15 degree tilt
- 6" height movement
- Mounts under TM, PF, and MS work surfaces 30" and 36" deep (will not fit 24" deep work surface)
Mouse Pad:
- 10" diameter
- Tilting and swivel
- Gel wrist pad
| Part No. | Description |
| UWKTM | Tray and Mouse Pad |
| UWKT | Tray only |
| UWMP | Mouse Pad only |
Keyboard Holder
KT1907
- KT1907 attaches to platform/VDT holder (PH1313 or PH1322) to support a standard keyboard at a 15-degree tilt
- Loading capacity: 6 lbs.
- Both platforms accept keyboard tray KT1907
- 18 gauge (.047) cold rolled steel
- Finished with a gray epoxy powder coat
- Weight: 1.5 lbs.
| Part No. | Description |
| KT1907 | Tray for Platform/VDT Holder |
| KT1907S | Tray for Shelf /Bin Rail Mount |
Mouse Pad
MP1010
- Mounts on side of PH1313 or PH1322
- Weight: 2 lbs.